Development of a Synchonous Data Transmission System.
Loading...
Date
1986
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Obafemi Awolowo University
Abstract
The development of a 2 - channel synchronous data transmission system is presented. The system is capable of accepting at the input two separate analog voltage signals that have zeroto 1kHz frequency range and amplitude not greater than 2.5 volts. The two analog voltage signals are multiplexed at the input of the-system and converted to corresponding digital representations. These digital representations are then transmitted by means of digital gates from the transmitting section serially and with transmission clock frequency of 6.6 MHz, through cable wire to a remote receiving section, where the received digital representations are re-converted to analog voltage signals and demultiplexed to produce at the output, two separate analog voltage signals plus noise.
The noise level does not exceed 5% of the signal level when filtered and leaves analog voltage signals with the same characteristics as those at the input of the system. The designed system is simple and can be used for laboratory demonstration on synchronous data transmission system. It may be useful as a communication medium for data exchange between two data processing terminals. The system may be used to transmit voltage signals from a central storage facility to a remote destination. In such circumstance the signals may be those derived from research results, medical findings and student/staff records. A computer base may then be set up and made accessible to users.
Description
113P
Keywords
Syncronous data transmission system Frequency range Digital, Representation
Citation
Agomo, U.U ( 1986)Development of a synchonous data transmission system.